Intrapur® Inline
IV Administration set with 0.2µm inline IV filter for gravity infusions
Ready-to-use IV Administration set (type Intrafix® Primeline) serially equipped with 0.2µm inline IV filter to retain particles, bacteria and fungi and to eliminate air.
I.V. administration sets for gravity infusion
Description on the label: Infusion set with 0.2μm inline filter
Advantages
3-part drip chamber design
- With elastic bottom chamber and transparent dome. Allows to see drop forming and constant visual monitoring of the flow rate of infusion solutions
- With Micro-Organism tight air vent filter (bacteria-tight and viral filter efficiency) with closable snap cap. Prevents the risk of contamination while venting the solution container
- With fluid filter (15µm mesh size) to provide high flow rate
- With clear and easy to pierce spike, featuring separated fluid inlet and air outlet to reduce risk of air entrainment
Tube
- Soft and clear PUR tubing with 3 x 4.1 mm lumen and 150cm length
0,2µm Inline Filter
- Low protein binding
- Eliminates effectively air in the line
- Retains particles, bacteria and fungi
- Helps to reduce the risk of medication errors since solid particles > 0.2µm occuring from incompatibility reactions are retained by the IV filter membrane
- Is bacteria-tight and a closed system following NIOSH standards1
- Min. flow rate ≥ 20 ml/min
Roller clamp
- Enables fine and flexible adjustment of flow rates
- Offers spike protection for safe disposal
- With tube dock designed to support handling during priming
Patient Connector
- With Luer Lock connection to the patient access.
Material related information
- Pressure resistance up to 0.5 bar
- Not manufactured with latex/ natural rubber
- Not manufactured with DEHP
- Not manufactured with PVC
- Not manufactured with BPA
Duration of use
- Product should be changed after 24 hours at the latest
1NIOSH definition: "A device that does not exchange unfiltered air or contaminants with the adjacent environment.”